Three-Axis Welding Positioners
2 three-axis welding positioners, WB3CC and WB3SC, with rated load from 500 to 1500 kg across their variants. The WB3CC has three horizontal axes; the WB3SC has two horizontal axes and one vertical axis.
Not sure which model fits?
Send the part weight, the reach you need and the cycle. We will name the model — and say plainly if a robot is not the right answer for it.
Three-axis welding positioners: 2 models, the WB3CC and WB3SC, with rated loads from 500 to 1500 kg across their variants. The WB3CC has three horizontal axes; the WB3SC has two horizontal axes and one vertical axis. The WB3CC and WB3SC provide two working zones: loading and unloading in one while the robot continues welding in the other. The manufacturer also lists fast part changeover without stopping the robot cycle and higher productivity thanks to a continuous operating cycle.
Size by the part weight together with the fixture. Whether a third axis is justified depends on the cycle: tell us the part and the cycle time and we will say whether a two-axis table is enough.
Compare models
| Model | Positioning repeatability | Number of axes | 180° turning time | Allowable eccentric offset | Maximum rotation speed | Rated load | Rated output torque |
|---|---|---|---|---|---|---|---|
| Three-axis positioner WB3CC | ±0.04 mm | 3 horizontal axes | 4.5 s | ≤150 mm | 64°/s | 500–1500 kg | 3200–4900 n·m |
| Three-axis positioner WB3SC | ±0.02 mm | 3 axes: 2 horizontal, 1 vertical | 4.5–5 s | ≤150 mm | 71–72°/s | 500–1500 kg | 4600 n·m |
Frequently Asked Questions
Whether a three-axis positioner is justified for your part depends on the part and the cycle — send us the drawing and we will say.
Where rotation and tilt are enough, a two-axis table is the simpler choice. Send us the drawing and the cycle time and we will say which case yours is.
Technical support is online: our engineers consult on setup, programming questions and fault-finding by video call. Spare parts are shipped directly from the factory.
CRP production is certified to ISO 9001, and the factory reports its products are certified to an MTBF above 100,000 hours.