Industrial Robots
Not sure which model fits?
Send the part weight, the reach you need and the cycle. We will name the model — and say plainly if a robot is not the right answer for it.
CRP industrial robots cover payloads from 3 to 360 kg and reach from 400 to 3444 mm across 61 models. The range spans arc welding, palletizing, machine tending, material removal, laser processing, collaborative and SCARA robots, so most cells on a shop floor can be built from one catalogue, and every CRP robot, whatever the series, is programmed from the teach pendant.
Model codes carry the two figures buyers compare first: in CRP-RA15-12 the 15 is reach in decimetres (1510 mm) and the 12 is rated payload in kilograms. That makes shortlisting quicker — RH14-10-W is a 1.4 m, 10 kg welding arm, RA28-360 a 2.8 m, 360 kg handling arm.
Choose by the two constraints that cannot be worked around: the mass at the wrist including gripper and cabling, and the furthest point the tool must reach at full extension. Everything else — cycle time, repeatability, protection class — follows from those.
Frequently Asked Questions
If the approach is always vertical and the part is flat, six axes are not needed. If any operation needs tool angle, four axes will not do it.
A frequent and expensive mistake is specifying against part weight and discovering the gripper takes up a third of the rating.
Reach also decides how many machines one robot can serve: measure from the robot base to the furthest load point of every machine and infeed in the cell. The first two digits of a CRP model code give the reach in decimetres — RA15-12 reaches 1510 mm.
For welding and handling this is the figure that matters. For metrology or fine assembly, tell us the tolerance you need and we will say plainly whether a robot holds it.
Technical support is online: our engineers consult on setup, programming questions and fault-finding by video call. Spare parts are shipped directly from the factory.
CRP production is certified to ISO 9001, and the factory reports its products are certified to an MTBF above 100,000 hours.